Alarm Recording - JVC SR-9240E Instructions Manual

7 RECORDING

7-4 Alarm Recording

Alarm recording functions during timelapse recording. When an alarm signal is input to the rear panel's ALARM IN terminal,
an index code is recorded on the tape and the VCR automatically switches to the VHS Standard (SP) mode for realtime
recording of the alarm situation. Normal timelapse recording is restored after the preset alarm recording duration has passed.
* Alarm recording will not start from the Pause mode.
• Set the alarm recording mode, alarm recording duration,
buzzer ON/OFF during alarm recording and the operation
mode at the tape end during alarm recording with the
function menu switches. (Menu switches for alarm/sensor
recording mode setting)
Display "AL"
Extinguished
indication
Timelapse
Record mode
mode
Timelapse
recording
* An index code (VISS) is recorded at the start point of the alarm recording as an alarm cue signal.
* During alarm recording, a +12 V signal is output from the rear panel's ALARM REC OUT terminal.
Lit
VHS
Standard (SP)
Alarm
recording
Alarm signal input
PAL
5 During alarm recording, the AL indication is lit on the
display. After alarm recording is complete, the AL
indication blinks on the display to show that an alarm
signal has been input.
Blinking Lit
VHS
Timelapse
Standard (SP)
mode
Timelapse
Alarm
recording
recording
Alarm signal input
"AL" indication
AL
TIME MODE
Blinking
Timelapse
mode
Timelapse
recording
33