Table of Contents
Advertisement
7 PLAYBACK AND SPECIAL-EFFECTS PLAYBACK
[STOP] button
Playback mode indicator
REC
STOP
REC
CHECK
REW
REVERSE
PAUSE
PLAY
FF
TRACKING
V. LOCK
TIMER SEARCH
DISPLAY LOCK
–
+
–
+
FIELD REV
FIELD ADV
[HDR] indicator
[PLAY] button
7-1 Preparation
Connection
Connect the output connectors on the rear panel correctly.
Menu switch setting
Set the menu switches in <VIDEO/VTR MODE> as
required.
5
[DETAIL] ... Factory setting: OFF
Set to "ON" to improve reproduction of picture detail.
However, the S/N ratio will be degraded.
5
[V. PULSE] ... Factory setting: OFF
Set to "ON" to add V. pulse in the normal play (2H or
6H) mode.
5
[CNT MEM SW] ... Factory setting: ON
Counter memory ON/OFF.
• Set to "ON" to use the counter memory function.
5
[AUTO REW] ... Factory setting: OFF
Automatic rewind ON/OFF.
• Set to "ON" to rewind the tape to the beginning when
the tape ends.
5
[REPEAT PLAY] ... Factory setting: OFF
Repeat playback ON/OFF.
• Set to "ON" to execute repeat playback.
* Noise may appear in the picture with tapes not
recorded on the SR-9090U.
Notes on playback
Tapes recorded on this VCR cannot be played back on
standard VHS VCRs. Use this VCR, an S-VHS VCR or a
VCR with SQPB function to play back tapes recorded on
this unit. Also be aware that not all S-VHS VCRs will be
able to play back tapes recorded on this unit, because
some use different S-VHS/VHS detection methods.
Try to avoid operations such as shuttle search or field
advance playback as much as possible. These put a
comparatively high stress load on the tape and can lead
to picture degradation over time.
During shuttle search or field advance playback, noise may
appear. This is normal with this unit and is not a malfunction.
46
[OPERATE] indicator
SR-9090U
REC
EJECT OPERATE
OPERATE
[OPERATE] button
HDR
RESET/
CANCEL
ON SCREEN
SHIFT
CNT RESET
MENU
TIME MODE
–
+
S E T
[TIME MODE+/–] button
7-2 Playback
1
Press the [OPERATE] button to turn the operating mode
on.
The [OPERATE] indicator lights.
2
Press the [TIME MODE +/–] button to set the play mode
to 2H (SP) or 6H (EP) mode.
The [2H] or [6H] indication is shown on the display.
• To play back a tape recorded in the timelapse mode
at slow speed, press the [TIME MODE +/–] button
to set the desired mode (24H, 48H..... 960H) (slow
play).
• Avoid using slow-motion playback continuously for
long periods (more than several hours).
3
Load the recorded cassette correctly.
* If a cassette is loaded when the operating mode is off,
the operating mode is switched on automatically (auto
operate on function).
If the cassette's safety tab has been removed, the
operating mode is turned on and play starts
automatically (auto play function).
4
Press the [PLAY] button to start play.
The play indicator is shown on the display and
the Play mode is engaged.
When a tape recorded in the HDR mode is played back,
the [HDR] indicator lights.
* No sound is output in the Timelapse Play mode.
When the play mode is set to 2H (SP) or 6H (EP),
playback operates as follows.
• Cassettes recorded in the 2H or ordinary (SP)
Timelapse modes are played back in the 2H (SP)
mode. [2H] is shown on the display.
• Cassettes recorded in the 6H or HDR Timelapse
mode are played back in the 6H (EP) mode. [6H] is
shown on the display
To stop playback
5
Press the [STOP] button.
The tape stops and the Stop mode is engaged.
7 PLAYBACK AND SPECIAL-EFFECTS PLAYBACK
REC
STOP
REC
CHECK
REVERSE
FF
REW
PAUSE
PLAY
TRACKING
V. LOCK
TIMER SEARCH
–
+
–
+
FIELD REV
FIELD ADV
[REW] button
[FF] button
[PLAY] button
[REVERSE] button
[PAUSE] button
7-3 Special-Effects Playback
Still playback
1
Press the [PAUSE] button during playback.
The still indicator is shown on the display and
the still picture is shown.
2
Press the [PLAY] button to restore the Normal Play
mode.
The Stop mode is automatically engaged if the VCR
remains in the Still mode for 3 minutes (approx.).
Field advance playback
1
Press the [PAUSE] button in the Play mode to engage
the Still mode.
2
While pressing the [PAUSE] button, press the [FF]
button or [REW] button.
The operation varies depending on how the [FF] or
[REW] button is pressed.
5
Each time the [FF] button or [REW] button is pressed,
the picture is advanced or reversed one field.
5
When the [FF] button or [REW] button is pressed for
more than 2 seconds, the picture is
advanced or reversed continuously field
by field (continuous field advance
playback).
3
Press the [PAUSE] button in the Continuous Field
Advance Play mode to restore the Still mode.
Press the [PLAY] button to restore normal playback.
• In the Continuous Field Advance Play mode, no
sound is output.
• When continuous field advance playback continues
for about 3 minutes, the Stop mode is automatically
engaged to protect the tape.
• When forward field-by-field playback is switched to
reverse field-by-field playback, noise may appear in
the picture for several seconds.
• During reverse field-by-field playback, noise may
appear in the picture.
SR-9090U
REC
EJECT OPERATE
OPERATE
HDR
RESET/
CANCEL
ON SCREEN
SHIFT
DISPLAY LOCK
CNT RESET
MENU
TIME MODE
–
S E T
+
Reverse playback
1
Press the [REVERSE] button in any mode except
Record, Record-Pause or Record Check.
The reverse indicator is shown on the display and
the Reverse mode is engaged.
• The tape is played back in reverse in the 2H or 6H
mode regardless of the playback speed mode setting.
* No sound is output.
2
Press the [PAUSE] button to engage the Still mode.
To restore the normal playback, press the [PLAY]
button.
47
Advertisement
Table of Contents
