Table of Contents
Advertisement
36
VIDEO Plus+
Programming
With the VIDEO Plus+ system, timer programming is greatly
simplified because each TV programme has a corresponding
code number which your recorder is able to recognize.
You can use the remote control with LCD panel to enter the
PlusCode number.
Before performing the VIDEO Plus+ Timer
Programming:
Make sure that the recorder's built-in clock is set properly.
Turn on the TV and select the AV mode.
LCD panel
1
2
1
4
7
1
2
Timer
®
2
3
5
6
3
8
9
4
4
0
3
A
Turn on the recorder.
1
Press
.
B
Load a cassette.
Insert a VHS (or S-VHS) cassette with the record safety
tab intact.
OR
Insert a Mini DV cassette with the erase protection switch
set to "REC".
C
Select the deck.
Press VHS or DV.
D
Access the PlusCode display.
Press LCD PROG.
The LCD panel looks like this:
E
Enter the PlusCode number.
Press the number keys to enter the PlusCode number of a
programme you wish to record.
If you make a mistake, press
The PlusCode number you enter appears on the LCD panel:
F
Transmit the PlusCode number.
Press
to transmit the PlusCode number from the remote
control to the recorder.
If the number you entered is invalid, "ERROR" appears on the
TV screen and "Err" appears on the front display panel. Input a
valid PlusCode number.
TIMER RECORDING
&
and input the correct number.
Advertisement
Table of Contents
