Next Function Memory; Repeat Playback - JVC LPT0679-001A Instructions Manual

24
1
2
1
4
7
1
2
2 3
5 6
3
8 9 4
4
0
3
PLAYBACK/RECORDING ON VHS DECK (cont.)

Next Function Memory

The Next Function Memory "tells" the recorder what to do after
rewinding. Before continuing, make sure the recorder is in the
Stop mode.
a- For Automatic Start Of Playback
3
Press , then press
b- For Automatic Power Off
3
Press , then press
c- For Automatic Cassette Ejection After Tape Rewind
3
Press , then press
NOTE:
The Automatic Power Off does not work if "AUTO TIMER" is set
to "ON" and if any timer programming has been made. If
"AUTO TIMER" is set to "ON", the recorder directly goes into
the Timer-Standby mode at the same time when the
pressed for the Automatic Power Off.

Repeat Playback

Your recorder can automatically play back the whole tape 100
times repeatedly.
1
Start playback.
4
Press .
2
Activate Repeat Playback.
4
Press and hold for over 5 seconds, then release.
The Play indicator (
slowly.
After playing back a tape 100 times, the recorder stops
automatically.
3
Stop Repeat Playback.
8
Press at any time.
4 3
Pressing ,
4
within 2 seconds.
1
within 2 seconds.
within 2 seconds.
u
) on the front display panel blinks
5 9
, or also stops Repeat Playback.
1
is