Select The Soundtrack; Video Stabilizer - JVC HR-VP675U Instructions Manual

Select The Soundtrack

Your VCR can record two soundtracks simultaneously (Normal
and Hi-Fi) and play back the selected one, or both together. Or,
when viewing a pre-recorded tape that contains two separate
Hi-Fi audio programs, you can choose to listen to either one by
selecting either "Hi-Fi L" or "Hi-Fi R" in step 3.
ACCESS MAIN MENU
SCREEN
1
Press MENU.
ACCESS FUNCTION SET
SCREEN
2
Move the highlight bar (arrow) to "FUNCTION SET" by
pressing CH5∞ or SHUTTLE PLUS%fi, then press OK
or SHUTTLE PLUS
SELECT AUDIO MONITOR
SET MODE
3
Move the highlight bar
(arrow) to "AUDIO
MONITOR" by pressing
CH 5 ∞ or SHUTTLE PLUS
% fi, then press OK or
SHUTTLE PLUS
select the desired mode:
a– Hi-Fi
b– Hi-Fi L
c– Hi-Fi R
d– Normal
e– Mix
RETURN TO NORMAL
SCREEN
4
Press MENU.
NOTES:
If the tape being played back has no Hi-Fi soundtrack, the
Normal soundtrack will be heard no matter what choice you
make in step 3.
If RF connection is used for TV, even if Hi-Fi audio monitor is
selected the sound will be mono and will be reproduced in
both loudspeakers.
.
FUNCTION
=VIDEO CALIBRATION
PICTURE CONTROL
AUTO TIMER
SUPERIMPOSE
to AUTO SP = EP TIMER
NEXT PAGE
SELECT WITH (5,∞) AND (OK)
PRESS (MENU) TO END
PREVIOUS PAGE

VIDEO STABILIZER

2ND AUDIO RECORD
=AUDIO MONITOR
AV COMPU-LINK
SELECT WITH (5,∞) AND (OK)
PRESS (MENU) TO END
Video Stabilizer
By activating the Video Stabilizer you can correct vertical
vibrations in the picture when playing back unstable recordings
that were made on another VCR. When this function is set to
"ON", vertical vibration will be automatically corrected. *The
default setting is "OFF".
ACCESS MAIN MENU
SCREEN
1
Press MENU.
ACCESS FUNCTION SET
SCREEN
2
Move the highlight bar
(arrow) to "FUNCTION
SET" by pressing CH5 ∞ or
SHUTTLE PLUS% fi , then
press OK or SHUTTLE
PLUS
ACTIVATE VIDEO
ON
AUTO
STABILIZER
OFF
ON
OFF
3
Move the highlight bar
(arrow) to "VIDEO
STABILIZER" by pressing
CH 5 ∞ or SHUTTLE PLUS
% fi, then press OK or
SHUTTLE PLUS
"ON".
ON
OFF
HI-FI
ON
RETURN TO NORMAL
SCREEN
4
Press MENU.
NOTES:
When you finish viewing the tape, be sure to set it back to
"OFF".
Regardless of the setting, this function has no effect during
recording and during special-effects playback.
The Superimpose mode indications may jitter vertically when
"VIDEO STABILIZER" is set to "ON".
To watch recordings with close-caption, it is necessary to set
the Video Stabilizer function to "OFF".
= FUNCTION SET
TUNER SET
INITIAL SET
.
PRESS (5,∞), THEN (OK)
PRESS (MENU) TO END
=VIDEO CALIBRATION
PICTURE CONTROL
AUTO TIMER
SUPERIMPOSE
AUTO SP = EP TIMER
NEXT PAGE
to set to
SELECT WITH (5,∞) AND (OK)
PRESS (MENU) TO END
PREVIOUS PAGE
=VIDEO STABILIZER
2ND AUDIO RECORD
AUDIO MONITOR
AV COMPU-LINK
SELECT WITH (5,∞) AND (OK)
PRESS (MENU) TO END
27
EN
MAIN MENU
FUNCTION
ON
AUTO
OFF
ON
OFF
ON
OFF
HI-FI
ON