Introduction; Dmx Channels; Setup; Replace Fuse - Varytec Easymove XL 60 Spot User Manual

2. Introduction

-

11 DMX Channels

- Pan 630°, Tilt 270°
- Colorwheel: 7 colours + open, rainbow effect
- Gobowheel: 6 gobos+open, wheelrotation
- Variable electronic strobo
- Variable electronic dimmer (0-100%)
- LED Display menu with invert
- Possibility to set manufacturers settings
- Fan cooled
2.1. DMX channels

3. Setup

Disconnect the power cord before replacing a fuse and always replace with the
same type fuse.
3.1.

Replace fuse

With a flat head screwdriver wedge the fuse holde out of its housing. Remove
the damaged fuse from its holder and replace with exact same type fuse. Insert
the fuse holder back in its place and reconnect power.
3.2.

Connect the fixtures

You will need a serial data link to run light shouw of one or more fixtures using a
DMX-512 controller or to run synchronized on two or more fixtures set to a
master/slave operating mode. The combined number of channels required by all
the fixtures on a serial data link determines the number of fixtures the data link
4 / 9