Clock Setting; Semi-Auto - JVC HR-VP436U Instructions Manual

1 2
4 5
NUMBER
7 8
0
MENU

Clock Setting

This step must be performed before going on to Auto, Semi-Auto
or Manual clock setting procedures (each starts from step 2).
2 2
1
6
q 5/8

Semi-Auto

3
2
6
9
CH
3
OK
SHUTTLE PLUS
4
ACCESS MODE SELECT
SCREEN
Place the arrow at the
Custom Set screen next to
"OVERRIDE AUTO
=OVERRIDE
CLOCK SET" by pressing
CH5∞ or SHUTTLE PLUS
5 ∞, then press OK.
SELECT MODE
At the Override Auto
Clock Set screen, place the
arrow next to "SEMI-
AUTO CLOCK SET" by
=SEMI-AUTO CLOCK SET
pressing CH or
SHUTTLE PLUS 5 ∞, then
press OK.
PRESS (5,∞), THEN (OK)
PRESS (MENU) TO END
ACCESS SELECT SCREENS
At the Semi-Auto Clock
Set screen, place the
=HOST CHANNEL SELECT
arrow next to the desired
mode by pressing CH
or SHUTTLE PLUS 5 ∞,
then press OK.
To select the Host Channel
— step 4
To select the Time Zone
— step 5
To select the D.S.T. mode — step 6
SELECT HOST CHANNEL
You can either select
"AUTO", or enter a PBS
channel number. For
automatic channel
selection, simply press
MENU. To manually select
the PBS channel, press the
PRESS (5,∞) TO SELECT
PRESS (MENU) TO END
appropriate NUMBER key,
CH or SHUTTLE PLUS
5 ∞ to cycle through the channel numbers (hold button
down to speed through numbers) and stop when the
desired number appears. Press MENU and the Semi-
Auto Clock Set screen reappears.
NOTE:
There are some PBS channels that do not transmit clock
setting data.
CONTINUED ON NEXT PAGE.
9
CUSTOM SET
AUTO CLOCK SET
LANGUAGE SELECT
VCR PLUS+ SET-UP
PRESS (5,∞), THEN (OK)
PRESS (MENU) TO END
OVERRIDE AUTO CLOCK SET
AUTO CLOCK SET
MANUAL CLOCK SET
SEMI-AUTO CLOCK SET
TIME ZONE SELECT
D.S.T. SELECT
PRESS (5,∞), THEN (OK)
PRESS (MENU) TO END
HOST CHANNEL SELECT
(CATV)
CH AUTO