Table of Contents
Advertisement
1
2
4
5
NUMBER
7
8
0
MENU
Manual
2
2
2
6
q
5/8
3
3
6
9
CH
4
OK
Auto
SHUTTLE PLUS
Auto need only be selected if Semi-Auto or Manual had
previously been selected.
2
SELECT MODE
At the Override Auto Clock Set screen, place the
arrow next to "MANUAL CLOCK SET" by pressing
or SHUTTLE PLUS 5 ∞, then press OK.
CH
SET DATE, TIME AND D.S.T.
The Manual Clock Set
screen is displayed and the
first setting that can be set
begins flashing.
Press the appropriate
NUMBER keys to set the
PRESS NUMBER KEY(0-9)
date and time (if only 1
digit, press "0" first). Press
PRESS (MENU) TO END
CH
or SHUTTLE PLUS
5 ∞ to set AM/PM and D.S.T. (Daylight Saving Time) to
"ON" (automatic adjustment based on VCR's clock) or
"OFF" (if D.S.T. doesn't apply to you).
Press OK after AM/PM and D.S.T. settings. The next
setting that can be set begins flashing. When you're
finished with this set-up procedure, press MENU to start
the clock.
NOTE:
CH 5 ∞ and SHUTTLE PLUS 5 ∞ can be used to perform
all operations. (In this case, press OK after each setting.)
MAKE CORRECTIONS
To change any of the settings, press OK or SHUTTLE
PLUS ™ £ until the item you want to change
blinks, then set as in step 3.
SELECT MODE
At the Override Auto Clock Set screen, place the arrow
next to "AUTO CLOCK SET" by pressing CH5∞ or
SHUTTLE PLUS 5 ∞, then press MENU as many times
as necessary to return to the normal screen.
11
MANUAL CLOCK SET
DATE
1/ 1/96 MON
TIME
– – : – – AM
D.S.T.
ON
OR (5,∞), THEN (OK)
Advertisement
Table of Contents
