Clock Set; Setting The Clock - JVC HR-S6975EK Instructions Manual

54
advanced features

Clock Set

You should only need to perform this function if:
• Auto Clock Set was not performed correctly by Auto Setup, Preset Download or Auto Channel
Set
• The VCR's memory backup has expired
• You want to change the Just Clock setting

Setting the Clock

get to the clock set screen Press MENU button. Move the highlight bar to
using the PR
set time and date When the
and PR
increments) and then press OK button (or
buttons to set the correct date (pressing and holding will advance the date in 15 day increments) and
then press OK button (or
way and press OK button.
set just clock Set as desired using the PR and PR
tons then press OK button (or
set preset for clock data source If you have set
to
CLOCK
to take its source data from. Use the PR and PR
CLOCK
buttons to select the preset and press OK button (or
start clock operation Press MENU button.
NOTE:
If the recorder's memory backup has expired or the AC was disconnected from the recorder, the
recorder will automatically perform Auto Clock Set when the power is restored.
Notes on Just Clock
Some TV stations transmit a time signal with their broadcasts. This VCR has the ability to use
this signal to update its internal clock (including the adjustment for British Summer Time). It will
do this every hour except for 23:00, 00:00, 01:00 and 02:00. By setting Just Clock to
enabling the VCR to do this.
Just Clock is not effective in the following circumstances:
• when the VCR is powered on
• when the VCR is in Timer or Auto Satellite Programme Recording modes
• when a difference of more than 3 minutes between the internal clock and the time signal exists.
• when reception conditions are poor.
and PR buttons and press OK button (or
buttons to set the correct time (pressing and holding will advance the time in 30 minute
). Set the correct year in the same
, you will need to specify a preset (station) for
ON
screen appears, the time will be blinking. Use the PR
CLOCK SET
). The date will blink. Use the PR and PR
).
).
TIME
but-
0: 00
JUST CLOCK : ON
TV PR.
[1] a k
JUST
[MENU]: EXIT
JUST
).
CLOCK SET
CLOCK SET
DATE YEAR
01 . 01 03
: 1
, you are
ON