Toshiba AT10LE-A Series User Manual page 87

1.
2.
A full charge takes about 2.5 hours.
1. Micro USB port (tablet)
3. Micro USB port (keyboard)
Connecting your tablet to the Keyboard Cover
Before you start using the Keyboard Cover, it is neccessary to do Bluetooth
pairing.This is required for the first time and after that, the system will
remember this keyboard until manually unpaired.
You may follow the steps as detailed below to do the pairing:
1.
2.
3.
User's Manual
Plug one end of the bundled micro USB to micro USB cable into the
micro USB port on your tablet.
Plug the other end of the bundled micro USB to micro USB cable into
the micro USB port on the keyboard.
Figure 7-6 Charging the Keyboard Cover
If your tablet power is low, connect the AC adaptor to your tablet while
charging. Both your tablet and the Keyboard Cover can be charged at
the same time.
If you are not going to use the Keyboard for a long period of time, turn
it off to conserve power.
On the Keyboard Cover, slide the Power switch left to turn it on. The
Bluetooth indicator on the Keyboard Cover will glow blue for
approximately three seconds.
Press the Connect button on the Keyboard Cover for approximately
three seconds, the Bluetooth indicator will blink blue for pairing.
On your tablet, open the Bluetooth settings by tapping All Apps ->
Settings -> Wireless & Networks -> Bluetooth. Slide the Bluetooth
switch to the ON position and then tap SEARCH FOR DEVICES. Your
tablet will start scanning available Bluetooth devices.
1
2
3
2. Micro USB to Micro USB cable
7-8