Hanging The Luminaire - Philips VL440 Spot User Manual

Hanging the Luminaire

The VL440 / VL770 / VL880 Luminaire can be hung horizontally or vertically from any structure
designed to work with the type of load created by this moving luminaire. Two mounting truss hooks or
other mounting hardware are required. Many compatible truss hooks are available from different
manufacturers for your particular needs.
A minimum of two hooks per luminaire is required. If mounting method does not use truss hooks, two
attachment points, per luminaire, are required.
Install mounting hardware and brackets:
Step 1. Install truss hooks on two provided truss hook brackets as required.
Note: Various types of truss hooks can be used. The Mega Claw truss hook (as shown in the example
above) as well as many other standard hooks, can be ordered separately.
Step 2. Determine required configuration of bracket installation. Brackets may be installed in either
orientation as shown.
Brackets
Step 3. While pulling up on locking mechanism release, fit keyed holes onto raised mounting
buttons at bottom of enclosure. Slide forward and release locking mechanism to lock in
place. Ensure brackets are locked securely. (Always face brackets in same direction as
shown.)
02.96 87.000 1 0
Bracket
Truss Hook Hardware
(not provided)
Figure 2-6: Installing Truss Hooks
Figure 2-7: Bracket Orientation Options
26 J uly 20 11
I : I
NSTALLATION NSTALLATION
Mega Claw Truss Hook
(not provided)
Example Truss
Hook Installation
2
P
ROCEDURES
Brackets
21