Recording; Basic Recording - JVC HR-S9850EU Instructions Manual

24
EN

Basic Recording

Turn on the TV and select the video channel (or
AV mode).
Recording Resume Function
If there is a power outage during recording, Instant Timer

Recording (

pg. 25) or timer recording (
the recording will resume automatically when power is
restored to the recorder unless the recorder's memory backup
has expired.
A
Insert a cassette with the record safety tab intact.
The recorder's power comes on automatically.
While "– – – –" is blinking on the front display panel, the tape
will run for a few seconds to search for the tape number.
B
Press PR +/– or the number keys. Or push the JOG dial
and turn it to the left or right to select the channel you
wish to record.
C
Press SP/LP/EP (
the recorder's front display panel to confirm the selected
tape speed.
In EP mode, the recording time is extended three times.
If you record a programme in EP mode on this recorder, it is
recommended to play back the EP-recorded tape on this
recorder.
It is not possible to select EP mode if "COLOUR SYSTEM" is
set to "MESECAM".
D
Press and hold
press
If "O.S.D." is set to "ON" (
screen while an index code is being marked.
B.E.S.T. takes place at the beginning of both the first SP and
the first LP (or EP) recording after inserting the cassette.
(
If "DIRECT REC" is set to "ON", the programme that appears
on the TV screen will be recorded (
E
Press
You can select channel during the Record Pause mode.
F
Press
Then press
Accidental erasure prevention
To prevent accidental recording on a recorded cassette,
remove its safety tab. To record on it later, cover the hole
with adhesive tape.
pg. 30, 32, 34),
Load a cassette.
Choose a programme.
Set the tape speed.
). Check the SP/LP/EP indicator on
p
(
pg. 71
Start recording.
and press
7 4
on the recorder.
7
pg. 69), "MARK" blinks on the
pg. 29)
Pause/Resume recording.
. Press to resume recording.
9 4
Stop recording.
on the remote control or
8
to remove the cassette.
0
RECORDING
)
on the remote control, or
pg. 70).
on the recorder.
0
Record safety tab