Diting; Edit From A Camcorder - JVC HR-S9600U Instructions Manual

54
EN
Edit From A
Camcorder
Recorder
S-
VIDEO
IN
VIDEO
IN
Audio/Video
cable
(supplied)
S-VIDEO
cable
(supplied)
VIDEO
OUT
S-VIDEO
OUT
NUMBER "0"
1
MENU
AUDIO IN
Your VCR
To rear panel
REMOTE PAUSE/AV
COMPULINK
connector
Mini-plug cable
(not supplied)
(JVC camcorder
only)
AUDIO
OUT
EDIT
Camcorder
Player
OK
0
4
TIME SCAN
OK
You can use a camcorder as the player and your VCR as the recorder.
MAKE CONNECTIONS
1
Connect an AV cable between the camcorder's VIDEO
OUT and AUDIO OUT connectors and your VCR's
VIDEO IN and AUDIO IN connectors.
If connecting a camcorder with an S-VIDEO output
connector, it is recommended to use the S-VIDEO
connection to minimize picture degradation while editing.
When a Master Edit Control-equipped JVC camcorder is
used, the camcorder is capable of controlling your VCR.
The mini-plug cable is a mono 3.5 mm mini-plug to
mono 3.5 mm mini-plug connector.
If connecting to a camcorder with a monaural output,
JOG connect the audio output connector on the
SHATTLE
camcorder to AUDIO IN L of the VCR.
LOAD A CASSETTE
2
Insert the cassette to be recorded on into the recorder.
SET RECORDER'S INPUT MODE
3
Set to "AUX". Press the NUMBER key "0" and/or CH to
select depending on the connector being used – "L-1"
for the rear panel input connectors, or "F-1" for the front
panel input connectors.
ACCESS MAIN MENU SCREEN
4
Press MENU.
ACCESS FUNCTION SET SCREEN
5
Press CH 5∞ or TIME SCAN %fi to move the highlight
bar (arrow) to "FUNCTION SET", then press OK or
TIME SCAN #.
SELECT AUX INPUT SET MODE
6
a– FRONT S-VIDEO IN : Move the highlight bar (arrow)
to "FRONT AUX INPUT" by pressing CH 5∞ or
TIME SCAN %fi, then press OK or TIME SCAN # to
set to "S-VIDEO".
b– FRONT VIDEO IN: Move the highlight bar (arrow) to
"FRONT AUX INPUT" by pressing CH 5∞ or TIME
JOG
SHATTLE
SCAN %fi, then press OK or TIME SCAN # to set to
"VIDEO".
c– REAR S-VIDEO IN: Move the highlight bar (arrow) to
"REAR AUX INPUT" by pressing CH 5∞ or TIME
SCAN %fi, then press
OK or TIME SCAN # to
set to "S-VIDEO".
d– REAR VIDEO IN: Move
the highlight bar
(arrow) to "REAR AUX
INPUT" by pressing CH
5∞ or TIME SCAN
%fi, then press OK or
TIME SCAN # to set to
"VIDEO".
PREVIOUS PAGE
= FRONT AUX INPUT
REAR AUX INPUT
CA RECORD
CA PLAYBACK
SELECT WITH (5,∞) AND (OK)
PRESS (MENU) TO END
EDITING
FUNCTION
=VIDEO CALIBRATION
PICTURE CONTROL
AUTO TIMER
SUPERIMPOSE
AUTO SP = EP TIMER
DIGITAL R3
NEXT PAGE
SELECT WITH (5,∞) AND (OK)
PRESS (MENU) TO END
PREVIOUS PAGE
VIDEO FRONT AUX INPUT
= REAR AUX INPUT
VIDEO
OFF CA RECORD
OFF CA PLAYBACK
SELECT WITH (5,∞) AND (OK)
PRESS (MENU) TO END
ON
AUTO
OFF
ON
OFF
ON
VIDEO
VIDEO
OFF
OFF