Tuner; Set Receivable Channels - JVC HR-S9600U Instructions Manual

Tuner

Turn on the TV and select the VCR channel 3 or 4 (or AV
mode).
1
4
NUMBER
7
1
MENU
INFORMATION
The VCR detects the band (TV or CATV) and selects the
correct band automatically during Auto Channel Set.
The selected band will be displayed on the right side of
"BAND" on the Tuner Set screen.
POWER
2 3
2
5 6
8 9
0
4
SP/EP
TIME SCAN
OK

Set Receivable Channels

TURN ON THE VCR
1
Press POWER.
ACCESS MAIN MENU
SCREEN
2
Press MENU.
ACCESS TUNER SET SCREEN
JOG
SHATTLE
3
Move the highlight bar
(arrow) to "TUNER SET" by
pressing CH5∞ or TIME
SCAN %fi, then press OK
or TIME SCAN
PERFORM AUTO CHANNEL
SET
4
Move the highlight bar
(arrow) to "AUTO CHAN-
NEL SET" by pressing
CH5∞ or TIME SCAN
%fi, then press OK or
TIME SCAN
Receivable channels in
your area are
automatically assigned to
the CH5∞ (+/–) buttons,
and non-receivable
channels are skipped.
The ghost reduction
mode (
automatically set to
"STANDARD" for all the
receivable channels.
NOTES:
At the end of Auto Channel Set, "SCAN COM-
PLETED" appears on screen.
If the scan was unsuccessful, "SCAN COMPLETED–
NO SIGNAL" appears on screen. Check the
connections and start again.
RETURN TO NORMAL
SCREEN
5
Press MENU.
MAIN MENU
FUNCTION SET
= TUNER SET
INITIAL SET
.
HI-FI REC LEVEL CTL
PRESS (5,∞), THEN (OK)
PRESS (MENU) TO END
TUNER SET
BAND
=AUTO CHANNEL SET
MANUAL CHANNEL SET
GHOST REDUCTION (GR) ON
.
SELECT WITH (5,∞) AND (OK)
PRESS (MENU) TO END
AUTO CHANNEL SET
SCANNING...
pg. 14) will be
PRESS (MENU) TO END
13
EN
CATV