Disassembly For Repair - Kenwood TK-7100 Service Manual

TK-7100
INSTALLATION / DISASSEMBLY FOR REPAIR
8. Align the connector on the underside of the ST-865KW4
with the connector on the top side of the ST-909, then
press down on cushion E to secure them.
ST-909
9. Flatten the cable so as to avoid potential damage when
mounting the shielding cover. Mount the shielding cover
and secure it with the five M2.6 screws.
Note :
• ST-909 and ST-865KW4 are available from SmarTrunk
Systems,Inc.
■ Setting With the KPG-80D
Select "External Devices" from the "Edit" menu and set
the "SmarTrunk".
14
ST-865KW4 Cushion E
Screw hole
1. When you remove the panel, turn the transceiver up side
down. Detach the panel by lifting the tabs as shown be-
low.
Tabs
Fig. 1
2. To remove the cabinet, first turn the transceiver up side
down. Detach the cabinet by prying the tabs as shown
below.
Tabs
Fig. 2
3. When mounting the front panel, match the 4 tabs of the
chassis with the panel, being sure they attach securely.
Tabs
Fig. 3
Tabs
Tabs