Table of Contents
Advertisement
MENU
"CA(Commercial Advance) RECORD" and "CA PLAYBACK" are
set to " OFF " at the factory. To set Commercial Advance
perform the following steps to set "CA RECORD" to "ON" and
"CA PLAYBACK" to "AUTO".
ACCESS MAIN MENU SCREEN
1
Press MENU as many times as necessary.
ACCESS FUNCTION SET 1 SCREEN
2
Press CH 5 ∞ or TIME
SCAN 5 ∞ to place the
arrow next to "FUNCTION
SET 1", then press OK.
ACCESS CA RECORD SCREEN
3
Press CH 5 ∞ or TIME
SCAN 5 ∞ to place the
arrow next to "CA
RECORD", then press OK.
SELECT MODE
4
Place the arrow next to
"ON" by pressing CH 5 ∞
or TIME SCAN 5 ∞.
If you don't want to use
Commercial Advance,
set it to "OFF".
8
CH
OK
TIME SCAN
MAIN MENU
PROGRAM SET
TUNER SET
=FUNCTION SET 1
FUNCTION SET 2
FUNCTION SET 3
R.A. EDIT
PRESS (5,∞), THEN (OK)
PRESS (MENU) TO END
FUNCTION 1
AUDIO MONITOR
TIMESCAN AUDIO
AUX INPUT
TAPE DUB MODE
=CA RECORD
CA PLAYBACK
HI-FI REC LEVEL
PRESS (5,∞), THEN (OK)
PRESS (MENU) TO END
COMMERCIAL ADVANCE
RECORD
=ON
OFF
PRESS (5,∞) TO SELECT
PRESS (MENU) TO END
RETURN TO FUNCTION SET 1 SCREEN
5
Press MENU.
ACCESS CA PLAYBACK SCREEN
6
Press CH5 ∞ or TIME SCAN 5 ∞ to place the arrow
next to "CA PLAYBACK", then press OK.
SELECT MODE
7
Place the arrow next to
"AUTO" by pressing CH5 ∞
or TIME SCAN 5 ∞ .
Select "AUTO" to
automatically skip over
CA recorded commer-
cials during playback.
Select "MANUAL" to
manually skip over CA recorded commercials by
pressing SKIP SEARCH.
Select "OFF" to disable CA Playback of CA recorded
commercials.
Press SKIP SEARCH during playback, with "MANUAL"
(or "AUTO") selected, to fast-motion the tape to the
end of the next commercial group or to the end of the
recording, and then resume normal playback.
NOTE:
If you press SKIP SEARCH during a commercial, the
VCR may not resume normal playback at the end of the
group of commercial. If this occurs press PLAY or STOP
to resume normal playback.
RETURN TO NORMAL SCREEN
8
Press MENU as many times as necessary.
NOTES:
If you set "CA RECORD" to "ON" while recording is in
progress, the VCR will mark an index code at that location.
You cannot change the "CA PLAYBACK" setting during
Commercial Advance fast-motion playback.
While recording is in progress with "CA RECORD" set to
"ON", you cannot mark an index code manually, nor change
the recording tape speed.
During playback with "CA PLAYBACK" set to "OFF", pressing
SKIP SEARCH starts fast-motion playback for 30 seconds on
the counter (
pg. 39).
Adding or erasing index marks codes (
group of commercials can cause incorrect CA Playback.
If there is a power outage while recording is in progress
with "CA RECORD" set to "ON" (
that are recorded after the power is restored may not be
detected properly.
If you want to stop recording when "CA RECORD" is set to
"ON" (
pg. 37), be sure to press STOP. If you press
POWER or TIMER to stop recording, that may affect
detection accuracy for commercials recorded afterwards.
U.S. Pat. No. 5,333,091
37
EN
COMMERCIAL ADVANCE
PLAYBACK
=AUTO
MANUAL
OFF
PRESS (5,∞) TO SELECT
PRESS (MENU) TO END
pg. 29) during a
pg. 37), commercials
Advertisement
Table of Contents
