Imple Playback And Recording; Simple Playback - JVC HR-S9400U Instructions Manual

Jvc video cassette recorder instructions
Hide thumbs Also See for HR-S9400U:
Table of Contents

Advertisement

26
EN
Simple
Playback
Turn on the TV and select the VCR channel 3 or 4 (or AV
mode).
REW (Rewind)
1
2
3
6
4
5
7
8
9
0
FF (Fast-Forward)
SIMPLE PLAYBACK AND RECORDING
LOAD A CASSETTE
1
Make sure the window side is up, the rear label side is
facing you and the arrow on the front of the cassette is
pointing towards the VCR. Don't apply too much
pressure when inserting.
The VCR's power comes on automatically.
The counter is automatically reset to "0H 00M 00S".
If the cassette's record safety tab has been removed,
playback begins automatically.
FIND PROGRAM START
POINT
2
If the tape is advanced past the start point, press REW
or turn the TIME SCAN SHUTTLE ring to the left. To go
forward, press FF or turn the TIME SCAN SHUTTLE ring
to the right.
START PLAYBACK
8
3
Press PLAY.
STOP PLAYBACK
4
Press STOP or STOP/EJECT. Then press STOP/EJECT
to remove the cassette.
Usable cassettes
Full-Size VHS
T-30 (ST-30**)
T-60 (ST-60**)
T-90
T-120 (ST-120**)
T-160 (ST-160**)
ST-210**
Compact VHS*
TC-20 (ST-C20**)
TC-30 (ST-C30**)
TC-40 (ST-C40**)
* Compact VHS camcorder recordings can be played on
this video recorder. Simply place the recorded cassette
into a VHS Cassette Adapter and it can be used just like
any full-sized VHS cassette.
** This VCR can record on regular VHS and Super VHS
cassettes. While only VHS signals can be recorded on
regular VHS cassettes, both VHS and Super VHS signals
can be recorded and played back using Super VHS
cassettes.

Advertisement

Table of Contents
loading

Table of Contents