Random Assemble Editing - JVC HR-S9500EH Instructions Manual

42
EN
Random
Assemble
Editing
Player
Audio signal
Another recorder
(w/PAUSE connector)
Recorder
PROG
1
MENU
JOG
PAUSE/
R.A. EDIT
Your recorder
Video signal
Mini-plug Cable
REMOTE
(Not provided)
PAUSE
2
4 5 6
7 8 9
0
4
PLAY
OK
This function makes it easier to create edited videos when your
video recorder is used as the source player in combination with
another JVC video recorder equipped with a Remote PAUSE
Connector. You can pre-program up to 8 scenes or "cuts" for
automatic editing in the sequence you have specified.
You can also perform Random Assemble Editing with a second
non-JVC recorder. pg. 43
MAKE CONNECTIONS
1
Connect your recorder's AV1 IN/OUT or S OUT/
AUDIO OUT connectors to the Video and Audio input
connectors on the recording deck, and connect your
recorder's PAUSE/R.A. EDIT connector to the PAUSE
connector on the recording deck.
If the recording deck doesn't have a PAUSE connec-
tor, connect to the R.A. EDIT connector instead.
The Mini-plug cable is a mono 3.5 mm mini-plug to
mono 3.5 mm mini-plug connector.
PREPARE FOR EDITING
2
Insert the cassette to be recorded on into the recorder
and set the recorder's input mode.
LOAD SOURCE CASSETTE
3
Insert the source cassette into your recorder.
SET EDIT MODE
4
See "Editing Mode Setting" on page 36.
START SOURCE PLAYBACK
5
Press PLAY.
ACCESS MAIN MENU
SCREEN
6
Press MENU.
ACCESS R.A. EDIT SCREEN
7
Press %fi to move the highlight bar (pointer) to
"R.A.EDIT", then press OK.
The screen is superimposed on the video playback in
step 8.
EDITING (cont.)