JVC HR-S9400E Instructions Manual page 25

S-VHS (Super VHS) and VHS
Your recorder can record in either S-VHS or VHS.
To record in S-VHS;
insert a cassette marked "S-VHS", the "S" (S-VHS) indicator
will light on the display panel.
then, perform the steps 1 – 4 below to set the "S-VHS" to "AUTO".
The S-VHS recording mode will be selected.
To record in VHS;
insert a cassette marked "VHS".
The VHS recording mode will be automatically selected
regardless of the S-VHS mode setting.
To record in VHS on an S-VHS cassette;
insert the cassette marked "S-VHS", the "S" (S-VHS) indicator
will light on the display panel.
then, perform the steps 1 – 4 below to set the "S-VHS" to
"OFF"; the "S" (S-VHS) indicator will go out.
The VHS recording mode will be selected.
ACCESS MAIN MENU
SCREEN
1
Press MENU twice.
ACCESS MODE SET
SCREEN
2
Move the highlight bar
(pointer) to "MODE SET"
by pressing PUSH JOG
% fi , then press OK.
SELECT MODE
3
Move the highlight
(pointer) to "S-VHS" by
pressing PUSH JOG % fi,
then press PUSH JOG
select "AUTO" or "OFF".
RETURN TO NORMAL
SCREEN
4
Press MENU.
MAIN MENU
MODE SET
AUTO CH SET
MANUAL CH SET
GUIDE PROG SET
CLOCK SET
JLIP ID NO. SET
R.A. EDIT
[5 ∞ ] =
[MENU] : EXIT
MODE SET
AUTO TIMER : OFF
O. S. D. : ON
to
S-VHS : AUTO
EDIT : OFF
AV2 SELECT : AV2
TIME SCAN : ON
AUDIO
[ 5 ∞] = [ ] : AUTO/OFF
[MENU] : EXIT
Receiving Stereo And Bilin-
gual Programmes
Your recorder is equipped with a Sound-Multiplex decoder (A2) and,
if you own the HR-S9400EH, a Digital stereo sound decoder
(NICAM) as well, making reception of stereo and bilingual broad-
casts possible.
When the channel is changed, the type of broadcast being
received will be displayed on the TV screen for a few seconds.
Type of Broadcast
Being Received
A2 Stereo
A2 Bilingual
Regular Monaural
*NICAM Stereo
*NICAM Bilingual
*NICAM Monaural
*Available with HR-S9400EH only.
To listen to a stereo programme, press AUDIO MONITOR
until "L" and "R" appear on the front display panel.
To listen to a bilingual programme, press AUDIO MONITOR
until either "L" or "R" appears on the front display panel (as
required).
To listen to the Standard (regular monaural) audio while
receiving a NICAM broadcast, press AUDIO MONITOR until
"NORM" appears on the front display panel. (HR-S9400EH
only)
NOTE:
"O.S.D." must be set to "ON" or the on-screen displays will not
appear ( pg. 27).
To Record Stereo And Bilin-
gual Programmes (A2)
Stereo programmes are automatically recorded in stereo on
the Hi-Fi audio track (with the normal audio track recording
mixed L and R channel sound).
Bilingual programmes are automatically recorded in bilingual
on the Hi-Fi audio track. The main soundtrack will be recorded
on the normal audio track.
NOTES:
If the quality of stereo sound being received is poor, the
broadcast will be received in monaural with better quality.
Before playing back a programme recorded in stereo, or a
bilingual programme, refer to "Soundtrack Selection" (
To Record NICAM Stereo
And Bilingual Programmes
(HR-S9400EH only)
The NICAM audio programme will be recorded on the Hi-Fi
audio track, and the Standard audio programme on the
normal audio track.
25
EN
On-screen Display
ST
BIL
(none)
ST NICAM
BIL NICAM
NICAM
pg. 18).