Stroller Handles (Sx And X) - TiLite Aero 2GX Owner's Manual

CHAPTER 4: BACKRESTS, PUSH HANDLES AND STROLLER HANDLES
Stroller Handles
(SX and X)
Adjusting the Height of the Receiver
Tools Needed:
• 5/32" Allen Wrench
• 7/16" Open End Wrench
1. Remove the Allen Screws that secure the stroller handle receiver to
the frame. See Figure 24.
2. Reposition the stroller handle receiver to the desired height and
reinsert the Allen Screws through the complete assembly. Securely
tighten the Allen Screws and lock nuts.
I
WARNING
When reassembling, make sure that at least one of the Allen Screws bolts
the axle plate to the frame. This may limit your options for adjusting the
height of the stroller handle receiver.
Height Adjustable Push Handles
(2GX, Aero X, SX, TX and X)
Adjusting the Height of the Push Handle
Tools Needed:
• 7/64" Allen Wrench
1. Loosen the two Allen Screws that secure the push handle inside the
push handle clamp, See Figure 25.
2. Raise or lower the push handle to the desired height.
3. Securely tighten the two Allen Screws
Folding Owners Manual
Lock Nuts
Stroller
Handle
Receiver
Figure 24
SX/X Stroller Handle Assembly
Allen Screws
Figure 25
2GX/Aero X/X/SX/TX/X Height Adjustable
Push Handles
30
Axle Plate
Allen Screws
OM_FOLDING_0907RevB