JVC HR-S6850EU Instructions Manual page 49

8
POWER SAVE
ON
OFF
8
VIDEO STABILIZER
ON
OFF
* The default setting is bold in the table below.
When this function is set to "ON", you can reduce the
power consumption while the recorder is turned off.
NOTES:
During Power Save mode ...
... the front display panel will be turned off.
... the Just Clock function (
... the picture may be distorted momentarily when you turn on/
off the recorder.
Power Save does not work when ...
... the recorder is in the Timer mode.
... the recorder's power is turned off after timer-recording or
Instant Timer Recording.
... the Automatic Satellite Programme Recording mode is
engaged ( pg. 33).
... "L-2 SELECT" is set to "DECODER" or "SAT" (
When this function is set to "ON", you can automatically
correct vertical vibration in the picture when playing back
unstable recordings made on another recorder.
NOTES:
When you finish viewing a tape, be sure to set this function to
"OFF".
Regardless of the setting, this function has no effect during
recording and during special effects playback.
The on-screen display may jitter vertically when this function is
set to "ON".
To watch recordings with close-caption, set this function to
"OFF".
EN
pg. 58) does not work.
pg. 41).
49