Next Function Memory; Manual Tracking; Repeat Playback; Soundtrack Selection - JVC HR-S6850EU Instructions Manual

Next Function Memory

The Next Function Memory "tells" the recorder what to do after
rewinding. Before continuing, make sure the recorder is in the
Stop mode.
a- For Automatic Start Of Playback
Press , then press
3
b- For Automatic Power Off
Press , then press
3
c- For Automatic Timer Standby
Press , then press
3

Repeat Playback

Your recorder can automatically play back the whole tape 100
times repeatedly.
1
Start playback.
Press .
4
2
Activate Repeat Playback.
Press and hold for over 5 seconds, then release.
4
The Play indicator ( ) on the front display panel blinks
u
slowly.
After playing back a tape 100 times, the recorder stops
automatically.
3
Stop Repeat Playback.
Press at any time.
8
Pressing , , or
4 3 5
NOTE:
Repeat playback is not possible with a cassette recorded in EP
mode.
within 2 seconds.
4
within 2 seconds.
1
(TIMER) within 2 seconds.
#
also stops Repeat Playback.
9

Manual Tracking

Your recorder is equipped with automatic tracking control.
During playback, you can override this and adjust the tracking
manually by pressing the PR buttons.
1
Override automatic tracking.
Press on the remote control.
p
2
Adjust the tracking manually.
Press PR + or –.
Press again to return to automatic tracking.
p
NOTE:
When a new tape is inserted, the recorder enters the automatic
tracking mode automatically.

Soundtrack Selection

Your recorder is capable of recording three soundtracks (HI-FI L,
HI-FI R and NORM) and will play back the one you select.
During Playback
Pressing AUDIO changes the soundtrack as follows:
TRACK
On-Screen Display
HI FI
For Hi-Fi stereo tapes
L R
j h
HI FI
For main audio of Bilingual tapes
L
j
HI FI
For sub audio of Bilingual tapes
R
h
NORM
For audio-dubbed tapes
HI FI
For audio-dubbed tapes
NORM
NOTES:
"HI FI L R" should normally be selected. In this mode,
j h
Hi-Fi stereo tapes are played back in stereo, and the normal
audio track is played back automatically for tapes with only
normal audio.
For instructions on recording stereo and bilingual programmes,
refer to page 24.
"O.S.D." must be set to "ON" or the on-screen displays will
not appear ( pg. 47).
21
EN
USE