Editing; Edit From A Camcorder - JVC HR-S6700EU Instructions Manual

EDITING

Edit From A
Camcorder
A
If the camcorder has no S-VIDEO output connector ...
AUDIO input
VIDEO
input
Audio cable (not provided)
Video cable (not provided)
VIDEO OUT
Camcorder
AUDIO OUT
Player
B
If the camcorder has an S-VIDEO output connector ...
AUDIO input
S-VIDEO
input
Audio cable (not provided)
S-Video cable (not provided)
S-VIDEO OUT
Camcorder
AUDIO OUT
Player
You can use a camcorder as the source player and your
recorder as the recorder.
A
A If the camcorder has no S-VIDEO output connector ...
B If the camcorder has an S-VIDEO output connector ...
Your recorder
B
Press AUX (NUMBER key "0") and/or PR to select "F-1"
for the AUDIO and VIDEO input connectors, or "S-1" for
the AUDIO and S-VIDEO input connectors, depending
on the connectors being used.
C
See "PICTURE CONTROL" on page 45.
D
Engage the Play mode of the camcorder.
E
Engage the Record mode of the recorder.
NOTES:
Your recorder
Make connections.
... connect the camcorder's AUDIO OUT and VIDEO
OUT connectors to the recorder's front panel AUDIO
and VIDEO input connectors.
... connect the camcorder's AUDIO OUT and
S-VIDEO OUT connectors to the recorder's front panel
AUDIO and S-VIDEO input connectors.
When using a monaural camcorder, connect its AUDIO OUT
connector to the AUDIO L input connector on your recorder.
Set the recorder's input mode.
Set the edit mode.
Start the camcorder.
Start the recorder.
All necessary cables can be obtained from your dealer.
When you select "EDIT" to dub tapes in step 3, be sure to
select "AUTO" (or "NORM" when "B.E.S.T." is set to "OFF")
after you finish dubbing the tapes.
35
EN