Olivetti Olibook M1025 User Manual page 81

Problem
The computer feels too hot.
Nothing appears on screen.
Possible Cause - Solution
Make sure the computer is properly ventilated and the Vent/Fan intakes are not
blocked. If this doesn't cool it down, put the system into Hibernate mode or turn
it off for an hour. Make sure the computer isn't sitting on a thermal surface.
Make sure you're using the correct adapter.
Make sure that your notebook is completely powered off before putting it into a
travel bag (or any such container). Putting a notebook which is powered on in a
travel bag may cause the Vent/Fan intakes to be blocked.
The system is in a power saving mode. Toggle the sleep/resume key combination,
Fn + F4 (see "Hibernate" on page 3 - 7/"Configuring the Power Button" on
page 3 - 8).
The screen controls need to be adjusted. Toggle the screen control key
combinations Fn + F8/F9. If you're connected to an external monitor, make sure it's
plugged in and turned on. You should also check the monitor's own brightness and
contrast controls.
The computer is set for a different display. Toggle the screen display key
combination, Fn + F7. If an external monitor is connected, turn it on.
The screen saver is activated. Press any key or touch the TouchPad.
Problems and Possible Solutions 8 - 7
Troubleshooting
8