Olivetti Olibook M1025 User Manual page 67

6. Insert a new module holding it at about a 30° angle and fit the connectors firmly into
the memory slot.
7. The module's pin alignment will allow it to only fit one way. Make sure the module is
seated as far into the slot as it will go. DO NOT FORCE the module; it should fit
without much pressure.
8. Press the module in and down towards the mainboard until the slot levers click into
place to secure the module.
9. Secure the keyboard, replace the battery and restart the computer to allow the
system to detect the hard disk drive.
10. Restart the computer to allow the BIOS to register the new memory configuration as
it starts up.
Upgrading The Computer
Upgrading the System Memory (RAM) 6 - 9
Re-Inserting the
Keyboard
When re-inserting the
keyboard firstly align the
three keyboard tabs at
the bottom of the key-
board with the slots in
the case.
6