Olivetti Olibook M1025 User Manual page 71

PC Camera Audio Setup
If you wish to capture video & audio with your camera, it is necessary to setup
the audio recording options in Windows.
1. Go to the Start menu and point to Settings (or just click Control Panel) and click
Control Panel, then double-click the Sounds & Audio Devices icon (Sounds,
Speech, and Audio Devices in Category View).
2. Click Advanced in the Volume > Device volume tab.
3. Click Options and scroll down and click Properties.
4. Select Realtek HD Audio Input from the Mixer device menu.
5. Make sure the Mic Volume (check box) is checked, then click OK.
6. Boost the volume in the Recording section (in the Recording Control menu) as high
as it will go, and make sure the Select check box is checked.
7. Close the Recording Control window, and then click OK.
8. Double-click the Realtek HD Audio Manager icon in the task bar /control panel.
9. Click Mixer (tab).
10. Click the button under Mic Volume to select it (you can boost the volume level as
high as required).
11. Click OK to close the control panel.
12. Run the BisonCap application program from the Start > Programs/All Programs >
BisonCam menu.
13. Go to the Devices menu heading and select Realtek HD Audio Input (it should
have a tick alongside it).
Additional Modules
PC Camera Module 7 - 3
7