To Use Both Timer Functions At The Same Time - Miele KM 6113 Operating And Installation Instructions

Change

To use both timer functions at the same time

If more than one switch-off time is programmed, the shortest
time remaining will show in the display, and the indicator
lamp for that particular cooking zone will flash. All the other
indicator lamps will light up constantly. If you want to check
on the remaining time for another zone, touch the m sensor
until the indicator lamp for the zone you require flashes.
^ Touch the m sensor until the indicator lamp for the zone
you require flashes.
^ Touch the + or - sensors to set the required time.
The minute minder and automatic switch-off functions can be
used at the same time.
If you have programmed in one or more switch-off times, and
would like to use the minute minder as well:
Touch the m sensor repeatedly until the minute minder
indicator lamp flashes.
If you are using the minute minder, and would like to
programme in one or more switch-off times as well:
Touch the m sensor repeatedly until the indicator lamp
flashes for the cooking zone required.
Shortly after the last entry, the shortest remaining time will
come up in the display.
If you want to check on the remaining time for another zone,
touch the m sensor until the indicator lamp for the zone you
require flashes.
Starting with the shortest remaining time which is showing in
the display, all cooking zones that are in use and the minute
minder are selected clockwise.
Timer
33