Safety Precautions; Safety And Instruction Decals - HUSTLER FasTrak Owner's Manual

This safety alert symbol is used to call attention to a message
intended to provide a reasonable degree of PERSONAL
SAFETY for operators and other persons during the normal
operation and servicing of this equipment.
DANGER – denotes immediate hazards which WILL result
in severe personal injury or death.
WARNING – denotes a hazard or unsafe practice which
COULD result in severe personal injury or death.
This manual uses two other words to highlight information.
IMPORTANT calls attention to special mechanical information
and NOTE: emphasizes general information worthy of special
attention.
All operators and mechanics should read this manual, and be
instructed about safe operating and maintenance procedures. If
the operators or mechanics cannot read and understand English,
it is the owner's responsibility to explain this material to them.
This machine meets or
specifications of the American National Standards Institute,
in effect at the time of production. However, improper use or
maintenance by the operator or owner can result in injury.
To reduce the potential for injury, comply with these safety
instructions and always pay attention to the safety alert
symbol, which means DANGER or WARNING - "personal
safety instructions." Failure to comply with the instructions
may result in personal injury or death.
Incorrect usage of this machine may result in severe
injury. Personnel operating and maintaining it should be

Safety and Instruction Decals

Specific safety warning decals are located on the equipment near the immediate areas of potential hazards. These decals should
not be removed or obliterated. Replace them if they become non-readable.
The following illustrations show the various safety decals that are located on the machine. A brief explanation is shown to help the
operator understand the meanings of these decals.
Read Owner's Manual and decals before
attempting to operate this machine.
601156_0110

SAFETY PRECAUTIONS

exceeds the B-71.1-2003
trained in the proper use and should read the manuals com-
pletely and thoroughly before attempting to set-up, operate,
adjust, or service this machine.
The decals are designed to give the operator brief information
needed in the daily operation and service of the machine. These
decals are not intended to be used in place of this manual but
instead are to be used as an extension of this manual. These
decals should not be removed or obliterated. Replace these
decals if they become unreadable.
• It is the owner's responsibility to make certain that the oper-
ators and mechanics read and understand this manual and all
decals before operating this machine.
• It is also the owner's responsibility to make certain that the
operators and mechanics are qualified and physically able
individuals, properly trained in the operation of this equip-
ment.
• All operators and mechanics must become familiar with the
safe operation of the equipment, operator controls and safety
signs.
• Never let children or untrained people operate of service the
equipment. Local regulations may restrict the age of the oper-
ator.
• The owner/user can prevent and is responsible for accidents or
injuries occurring to themselves, other people or property.
• The owner should also ensure that the operator/mechanic
know that they are responsible for their own safety as well as
the safety of other persons within the vicinity. Remember, the
operator is responsible for accidents or hazards occurring to
other people or their property.
• Do not smoke while refueling.
• Do not remove the fuel tank cap or fill with engine running or while
the engine is hot.
• Allow engine to cool before storing machine inside a building.
• Store away from open flame or spark if there is fuel in tank.
• Clean up any gasoline spills.
• Do not refuel while in enclosed trailer or other enclosed areas.
2-1