Replacing Components In Your Gateway Profile 4; Preparing Your Computer; Replacing Drives - Gateway Profile 4 Service Manual

Replacing Components in Your Gateway Profile 4

Preparing your computer

Warning
To prepare your computer:
1
Turn off your computer.
2
Following all static electricity discharge precautions, disconnect the power
cord and all other external cables.
3
Press the power button to drain any residual power from your computer.

Replacing drives

Use the procedures in this section to replace the:
Diskette drive
Optical drive
Hard drive
Tools you need to complete these tasks:
4
To avoid exposure to dangerous electrical voltages and
moving parts, turn off your computer, then unplug the
power cord and modem cable before opening the case.
Phillips screwdriver
www.gateway.com