Using Your Dishwasher; Before First Use; Filling With Dishwasher Salt - Baumatic BDWS60SS User Manual

Using your dishwasher

Before first use

o Install the appliance as per the installation instructions contained
within this booklet.
o Add 1.5Kg specialist dishwasher salt to the dishwasher water
softener compartment and then fill with tap water. After this you
should set the water softener level.
o Fill the rinse aid dispenser and then set the rinse aid dosage.

Filling with dishwasher salt

IMPORTANT: You should only use salt that is specially
designed for use in a dishwasher. If any other type of salt is
used in the appliance (in particular table salt), it will damage
the water softener.
o Ideally you should fill the water softener with salt, just before you
are about to run a wash program. This will help to clear any salt
that may have overflowed from the water softener during the salt
filling process.
11
o Open the door of the dishwasher and
then remove the lower basket. The
basket should
remove it.
o Turn the
anticlockwise and remove it.
o Pour salt into
compartment using the funnel that is
supplied with the appliance. You should
add approximately 1.5 kg of salt into the
water softener.
o Then pour tap water into the water
softener until it fills.
o It is perfectly normal for a small amount
of water to come out of the water
softener compartment.
be empty when
water softener
the water softener
you
cap