HP Integrity rx7640 Installation Manual page 22

HP Integrity rx7640 Server and HP 9000 rp7440 Server Overview
The information in this guide applies to the HP Integrity rx7640 and HP 9000 rp7440 servers, except for a
few items specifically denoted as applying only to the HP Integrity rx7640 Server.
1
The server is a 10U high, 8-socket symmetric multiprocessor (SMP) rack-mount or standalone server.
Features of the server include:
• Up to 256 GB of physical memory provided by dual inline memory modules (DIMMs).
• Dual-core processors.
• Up to 16 processors with a maximum of 4 processor modules per cell board and a maximum of 2 cell
boards.
• One cell controller (CC) per cell board.
• Turbo fans to cool CPUs and CCs on the cell boards.
• Up to four embedded hard disk drives.
• One half-height DVD drive, two slimline DVDs or one DAT drive.
• Two front chassis mounted N+1 fans.
• Two rear chassis mounted N+1 fans.
• Six N+1 PCI-X card cage fans.
• Two N+1 bulk power supplies.
• N+1 hot-swappable system oscillators.
• Sixteen PCI-X slots divided into two partitions. Each partition can accommodate up to eight
PCI/PCI-X/PCI-X 2.0 cards.
• Up to two core I/O card sets.
• One manageability processor per core I/O card with failover capability when two or more core I/O cards
are installed and properly configured.
• Four 220 V AC power plugs. Two are required and the other two provide power source redundancy.
1. The U is a unit of measurement specifying product height. One U is equal to 1.75 inches.
22
Chapter 1