Customized Buttons - Panasonic NCP500 Operating Manual

Programmable Feature
(PF):
(PF)
Located on the upper part of the
Flexible button array or on the
DSS Console.
Assigns the desired button and
used to access the stored
feature. Mostly used as a
One-touch Dialing button. (Only
the "F and number" may be
shown on some telephones.)
SELECT:
SELECT
Used to select the displayed
item or to call the displayed
phone number.
ENTER:
Used to confirm the selected
item.
NEXT PAGE:
Used to switch the page for the
Self Labeling feature.
(KX-NT366 only)

Customized Buttons

If the term is in parentheses like (Account) in this manual, it means a flexible button has been made into
an "Account" button. To customize, refer to "3.1.4 Customizing the Buttons".
Button
Loop-CO (L-CO)
Group-CO (G-CO)
Single-CO (S-CO)
Direct Station Selection
(DSS)
One-touch Dialing
Incoming Call Distribution
Group (ICD Group)
Message
Message for Another
Extension
Document Version 2009-11
MODE
SHIFT
Used to access an idle CO line for making outside calls.
Incoming outside calls from any CO line arrive at this button.
Used to access an idle CO line in a specified CO line group for making
outside calls.
Incoming calls from CO lines in the assigned CO line group arrive at this
button.
Used to access a specified CO line for making or receiving outside calls.
Used to access an extension with one touch.
It is also possible to be changed to the other feature button.
Used to access a desired party or system feature with one touch.
Used to access a specified incoming call distribution group for making or
receiving calls.
Used to leave a message waiting indication or call back the party who left
the message waiting indication.
Used to have a Message button for another extension.
1.1.1 Before Operating the Telephones
MODE:
Used to shift the display to access
various features.
SHIFT:
Used to access the second level of Soft
button features.
CANCEL:
Used to cancel the selected item.
Feature
Operating Manual 23