Printing Message - Panasonic NCP500 Operating Manual

•
If Automatic Call Hold has been preprogrammed, you can put the current call on hold
automatically by pressing another PDN button to make or answer another call.
Call Transfer Using SDN Button
You can transfer a call to a PDN extension with a simple operation using a corresponding SDN button.
To transfer a call to a PDN extension
PT/PS
During a conversation
*
(SDN)
Press SDN.
•
System programming is required to use this feature during a conversation with an extension.
•
* When an SDN button is in Standard SDN Key Mode, you have to press the SDN button
twice to transfer the call, unless you used that SDN button to answer an incoming call.
Customizing Your Phone
•
3.1.2 Personal Programming—Preferred Line Assignment—Incoming
Select the seized line when going off hook.
•
3.1.2 Personal Programming—Preferred Line Assignment—Outgoing
Select the seized line when going off-hook.
•
3.1.4 Customizing the Buttons
Create or edit a Primary Directory Number (PDN) or Secondary Directory Number (SDN)
button.

1.3.50 Printing Message

You can record a variety of information from your extension using up to 8 preprogrammed messages. Message
information from all extensions is recorded with the PBX. For example, it is possible to use this feature as a
time card by selecting preprogrammed "sign in" and "sign out" messages.
In a hotel-type environment, this feature can be used to record room information from a room extension.
For a list of preprogrammed messages, consult your dealer.
Document Version 2009-11
Talk.
This step can be omitted.
On-hook.
1.3.50 Printing Message
Operating Manual 107