Table of Contents
Advertisement
3 Disassembly and Reassembly
3 Disassembly and Reassembly
This section of the service manual describes the disassembly and reassembly procedures for the
MJ15AS*/MJ17AS*/MJ19AS*/MJ15BS*/MJ17BS*/MJ19BS*/MJ19ES* TFT-LCD monitors.
WARNING: This monitor contains electrostatically sensitive devices. Use caution when handling
!
these components.
3-1 Disassembly
Cautions:
1. Disconnect the monitor from the power source before disassembly.
!
1
MJ15AS*/MJ15BS*/MJ17AS*/MJ17BS*/
MJ19AS*/MJ19BS*/MJ19ES*
1. After placing monitor on the cushioned table,
remove two screws on the left and right of the
bottom.
2. Disconnect back cover from monitor after
grabbing the right edge of the set (
lifting the stand(
2
3. Remove 2 screws from the shield.
4. Disconnect function cable from the cover front
and lift up the panel. Remove 4 screws from
the panel shield. (Right / Left)
5. Lift up the panel shield and carefully remove
the silicon glue on the cables with a nipper.
!
Please use caution when removing the silicon.
).
2
Caution : Lamp wire may be easily damaged.
) and
1
3-1
Hide quick links:
Advertisement
Table of Contents
