Advertisement
3 Disassembly and Reassembly
This section of the service manual describes the disassembly and reassembly procedures for the
LW15E33C/LW17E34C monitor.
WARNING: This monitor contains electrostatically sensitive devices. Use caution when handling
these components.
3-1 Disassembly
Cautions : 1. Disconnect the monitor from the power source before disassembly.
2. Follow these directions carefully; never use metal instruments to pry apart the cabinet.
3. R/Cover opening jig : BH81-00001A
3-1-1 LW15E33C
LW15E33C/LW17E34C
1. Loacte the monitor on the cushioned table
with face down. Remove the stand from LCD-
TV and pull the rear cover by pressing a hand.
2. Remove power cable on the hand and signal
cable on the driver.
3. Remove 2 screws on the rear cover and
remove the rear cover by using opening jig.
4. Open the rear cover and remove 6 screws
from the holder.
5. Disconnect ass'y shield PCB cable and
inverter cable from the shield.
(see illustrations)
3-1
Advertisement
