Pnp/Pci Configuration Setup - AXIOMTEK SBC81206 Series User Manual

5.10 PnP/PCI Configuration Setup

This section describes the configuration of PCI (Personal Computer
Interconnect) bus system, which allows I/O devices to operate at
speeds close to the CPU speed while communicating with other
important components. This section covers very technical items that
only experienced users could change default settings.
PNP OS Installed
Select Yes if the system operating environment is Plug-and-Play
aware (e.g., Windows 95). The default value is "No".
Init Display First
This item allows you to decide whether PCI Slot or Onboard to be
the first primary display card.
Reset Configuration Data
Normally, you leave this item Disabled. Select Enabled to reset
Extended System Configuration Data (ESCD) when you exit Setup
or if installing a new add-on cause the system reconfiguration a
serious conflict that the operating system can not boot. Options:
Enabled, Disabled.
Resources Controlled By
The Award Plug and Play BIOS can automatically configure all
boot and Plug and Play-compatible devices. If you select Auto, all
Phoenix-Award BIOS Utility
SBC81206 PICMG 1.0 SBC User's Manual
53