Pioneer XV-DV303 Service Manual page 96

1
Disassembly of the Traverse Mechanism Assy-S and the Pickup Assy-S
1
A Remove the Tray Panel, Bonnet, Front Panel,
CONTROL Assy and Loading Mechanism Assy.
Remove the Bridge (Screw ×1).
2
3
Pull out the Tray and remove it while unhooking a Hook.
4
Turn the Short SW to Short side.
5
Remove four connectors.
3
-1
B
Hook
5
C
3
-2
RearView
DVDM Assy
Side
D
Caution in the tray insertion
In the Tray insertion, insert it after matching a triangle mark
of the Loading Base and a position of pin of the Drive Cam.
E
F
96
1
2
Bridge
2
-1
2
-2
× 3
5
Short Open
4
Short SW
Loading Base
Triangle mark
Pin Drive Cam
2
3
Remove the DVDM Assy (Screws ×3), DVD IF ASSY (Screws
6
×3) and Adapter02 L and R (Screws 2 ×2).
7
Remove a screw.
Cautions:
Screw is locked with Silicone Bond.
Please lock it with Silicone Bond when installs it.
8
Remove the FFC Holder with the state which Flexible Cable
was atatched.
Traverse Mechanism
Assy
FFC
Holder
It may be some different
in the shape and styling.
Pickup Assy
When Removing The Traverse Mechanism Assy-S
9
Remove the Pickup Flexible Cable
Unhook ( ×4)
10
11
Remove the Traverse Mechanism Assy
× 2
10
It may be some different
in the shape.
XV-DV303
3
4
Silicone Adhesive
7
GEM1037
8
Bottom View
× 2
10
11
9
Traverse Mechanism
Assy
Exchange
4