Switching On The Notebook For The First Time (Devices With Pre-Installed Windows Operating System) - Fujitsu AMILO Notebook Pi 3560 Setup Manual

Switching on the notebook for the first time (devices
with pre-installed Windows operating system)
Switchingon for thefirsttime
We recommend that the notebook is supplied with power through
the mains adapter during this procedure.
When you switch your notebook on for the first time, the supplied software
is installed and configured. Because this installation procedure must not be
interrupted, you should set aside enough time for it to be fully completed and
connect the notebook to the mains outlet using the mains adapter.
During installation, the notebook must only be rebooted when you are requested to do so!
We strongly recommend that, as soon as possible after purchasing
your equipment, you create a backup copy on DVD of the pre-installed
operating system in its delivery configuration.
You can find further information on how to restore the operating system, drivers,
manuals and special software in the "Recovery Process" manual.
Your operating system is pre-installed on the hard disk to help you when you
start using your notebook for the first time.
► During installation, follow the on-screen instructions.
Consult the operating system manual if anything is unclear about the requested input data.
If a Windows operating system is installed on your notebook, you will find more
information on the system and drivers, help programs, updates, manuals etc. on
the notebook or on the Internet under "http://ts.fujitsu.com/support".
A26391-K296-Z201-1-7619, edition 1
Preparing your notebook for use
► Switch the notebook on (1).
9