Switching On The Notebook For The First Time; Switching On The Notebook - Fujitsu Siemens AMILO Pro answers 2 Getting Started

AMILO Pro

Switching on the notebook for the first time

When you switch on your notebook for the first time, the supplied software is installed and
!
configured. Due to the fact that this installation must not be interrupted, you should set
aside enough time for it to be fully completed and connect the notebook to the mains
outlet using the power adapter.
During installation, the notebook may only be rebooted when you are requested to do so!
Your operating system is pre-installed on the hard disk to facilitate the procedure when you use your
notebook for the first time.
► Switch the notebook on (see the "Switching on the notebook" section).
► During installation, follow the instructions on screen.
Consult the operating system manual if there is anything unclear about the requested input data.
If there is installed on your notebook a Windows operating system the "Drivers°&°Utilities"
i
CD is included in the delivery scope. You will find further information on the system,
drivers, utilities, updates, manuals etc. on this "Drivers & Utilities" CD.

Switching on the notebook

► Press the Suspend/Resume button (1) to switch on the notebook.
The power-on indicator (2) of the notebook lights up.
8
1
2
A26391-K149-Z100-1-7619, Edition 2