Led Status - Sony EVI-D80N Technical Manual

Pan/Tilt Status Code List
P Q R S
- - - - - - - - 0 - - - - - - 1 A Pan movement all the way to the left
- - - - - - - - 0 - - - - - 1 - A Pan movement all the way to the right
- - - - - - - - 0 - - - - 1 - - A Tilt movement all the way up
- - - - - - - - 0 - - - 1 - - - A Tilt movement all the way down
- - - - - - - - - - 0 0 - - - - Pan movement is correct
- - - - - - - - - - 0 1 - - - - Pan position cannot be detected
- - - - - - 0 0 0 - - - - - - - The Tilt movement is correct
- - - - - - 0 1 0 - - - - - - - The Tilt position cannot be detected
- - - - 0 0 - - 0 - - - - - - - No movement instructions
- - - - 0 1 - - 0 - - - - - - - In the midst of a Pan/Tilt
- - - - 1 0 - - 0 - - - - - - - Pan/Tilt completed
- - - - 1 1 - - 0 - - - - - - - Pan/Tilt failed
- - 0 0 - - - - 0 - - - - - - - Not initialized
- - 0 1 - - - - 0 - - - - - - - Initializing
- -1 0 - - - - 0 - - - - - - - Initialization completed
- -1 1 - - - - 0 - - - - - - - Initialization failed
( - : optional)
Pan/Tilt Position (for reference)
PAN E1E5 (-170 degree) to 1E1B (+170 degree)
TILT FC75 (-20 degree) to 0FF0 (+90 degree) (IMAGE FLIP: OFF)
F010 (-90 degree) to 038B (+20 degree) (IMAGE FLIP: ON)

LED Status

Main power ON Power On (including initializing period)
When receiving infrared signals form Remote Commander
At position detection error
Standby status
Power off by VISCA or the Remote Commander
Main power Off
Initialization Pan/tilt error
error
Internal error(LSI, etc.)
BOTTOM
Setting error
switch (Example: when the BOTTOM switch 5 is set to ON.)
For More Information Please Call Aegis Electronic Group, Inc. * (888) 687-6877 Phone * aegis-g2@aegiselect.com * http://www.aegis-elec.com
Parameter (position)
Status
Command List
POWER (Green) STANDBY (Orange)
On
Blinking
On Blinking
Off
Off
Blinking Blinking
Blinking alternately
On
Off
Off
On
Off
On
42