Troubleshooting; Mower Cut Quality - Dixon ZTR 4000 series Operator's Manual

MOWER CUT QUALITY:

There are many variables that can effect the cut quality of any riding mower. Type and
conditions of grass, cut height setting, engine RPM and ground speed are some of the variables
that interact creating differences in cut quality. Examination of one 0r more of the above will
generally produce a quality cut.
The Troubleshooting Chart suggests practices and adjustments that may be helpful in
improving cut quality. Your Dixon ZTR dealer js also available to provide assistance to you.
SITUATION
Poor cut quality
Poor cut quality
Poor cut quality
Poor cut quality
Poor cut quality
Poor cut quality
Poor cut quality
Poor cut quality
Page 32

TROUBLESHOOTING

CAUSES
Ground speed
Loose engine to mower deck
belt
Engine RPM too low
Dull or bent blade
Un-level mower deck
Grass buildup under mower
deck
Improper blades
Uneven tire pressures
REMEDY
Reduce mowing speed
Refer to pages 24-25
Increase engine RPM to maximum
Sharpen or replace as required
Consult your dealer
Clean out underside of mower deck
Replace with original equipment blade
designed for the 4000 Series Models
Check and adjust as required per
operators manual