Helmet Holder - Yamaha XV19CSD Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS

Helmet holder

4
1. Helmet holding cable
2. Helmet holder
The helmet holder is located under the
rider seat. A helmet holding cable is
provided beside the owner's tool kit to
secure a helmet to the helmet holder.
To secure a helmet to the helmet
holder
1. Remove the rider seat. (See page
4-12.)
2. Pass the helmet holding cable
through the buckle on the helmet
strap as shown, and then hook the
cable loop over the helmet holder.
EAU38342
1. Helmet holding cable
2. Helmet
3. Place the helmet on the left side of
the vehicle, and then install the rid-
er seat. WARNING! Never ride
with a helmet attached to the
helmet holder, since the helmet
may hit objects, causing loss of
control and possibly an acci-
dent.
[EWA10161]
place the helmet on the left side
of the vehicle. Some helmets
may contact the muffler when
placed on the right side be-
cause of their size or shape.
[ECA15331]
To release the helmet from the hel-
met holder
Remove the rider seat, remove the hel-
met holding cable from the helmet hold-
er and the helmet, and then install the
seat.
NOTICE: Be sure to
4-13