Table of Contents
Advertisement
2. Press and release the keyboard sleep key or the front panel power switch
(
).
FIGURE 2
3. From the menu displayed on the system monitor, select Shutdown.
To Power Off the Workstation When the System is at the ok
Prompt (OpenBoot PROM Interface)
1. Press and hold the front panel power switch for four seconds (
off the workstation.
This action forces an immediate power off of the workstation. Any unsaved data is
lost.
Verifying Power Off
Caution – Pressing the power switch does not remove all power from the
workstation. A trickle current remains in the power supply. To remove all power
from the workstation, disconnect the power cord.
Workstation Power Switch
FIGURE 2
Sun Blade 1000 and Sun Blade 2000 UltraSPARC III Cu CPU Module Installation Guide
Power switch
) to power
FIGURE 2
7
Advertisement
Table of Contents
