Table of Contents
Advertisement
38
advanced features
Picture Quality
Manual Tracking
Your VCR is equipped with automatic tracking control. This will
be adequate for most tapes and will automatically adjust the
tracking to suit the particular tape in use but if you insert an old
or worn tape, it may be necessary to manually adjust the track-
ing in order to get the best picture. If automatic tracking fails, you will notice noise bars appear-
ing across the picture; you can correct this by manually overriding the tracking using the follow-
ing steps.
adjust tracking manually During playback, use the
manually.
NOTE:
When a new tape is inserted, the VCR returns to automatic tracking.
Picture Control
This feature allows you to select the most appropriate picture quality according to the type of
tape or use of this VCR. The default setting is
get to the main menu Press MENU. Select the icon
using the * and Tbuttons and press OK.
select picture control mode Select the desired mode
using the ^ and & buttons and press * or T.
OFF:
:
SOFT
:
SHARP
return to normal screen Press MENU.
NOTE:
You can perform EPC setting only during playback.
Picture quality is not adjusted.
Reduces image coarseness when viewing overplayed
tapes containing lots of noise.
Clearer, sharper-edged picture when viewing images
with lots of flat, same-coloured surfaces such as
cartoons.
or
buttons to adjust the tracking
PR +
–
.
OFF
EPC
EPC
OFF
SOFT
SHARP
Advertisement
Chapters
Table of Contents
