JVC HR-J295EK Instructions Manual page 11

Check the Results
Make sure that all necessary stations have been stored in the VCR's memory by
using the ^ and & buttons.
If station names (ID —
station name will be displayed on the TV screen.
Finish Off
return to normal screen Press MENU.
The Tuner Set is completed.
IMPORTANT
• re-running setup Plug&Play Setup may not behave as described if it has
already been run on the VCR. This is because some of the information gathered
on the first Plug&Play Setup is retained in memory and that part of the process
may be skipped by the VCR.
• duplicate stations You may be able to receive the same station from two
different transmitters in which case Plug&Play Setup will detect and store both.
It is normal for one transmitter to give you a better quality picture than the
other; to delete those stations which have a poor picture
page 19.
• manual station setting If any of the above problems occur, refer to
page 19 to input station names (
station preset positions (
IF YOU HAVE ANY DIFFICULTY WITH THE ABOVE PROCEDURES CALL THE JVC
CUSTOMER SERVICE HOT LINE ON 0870 330 5000
pg. 21) have also been stored in the VCR's memory, the
Change Station Name
pg. 20, Change Station Preset Position
plug&play setup
Delete A Channel
). You can also change
).
11
on