JVC HR-J291EA Instructions Manual page 9

Changing station name (B)
A
Access Main Menu screen, then
Manual Channel Set screen
Press MENU. Press w e to select the icon
"PR SET", then press OK.
● The Manual Channel Set screen of the
channel position currently received
appears.
B
Access Confirmation screen
Press MENU.
C
Select position
Press rt to select the channel, then press OK.
D
Select character for station name
Press e to select "STATION" setting, then press OK. Press e until
the first letter of the station name begins blinking.
E
Enter new character
Press rt to cycle through the characters, then press e. Enter the
remaining characters the same way (maximum of 5). After entering
all characters, press OK.
● The characters available for the station name are A–Z, 0–9, +,
–, . (period), I (space).
● If you make a mistake, press w until the incorrect character
begins blinking. Then enter the correct character by pressing
rt.
F
Check setting
Press MENU. The Confirmation screen appears.
G
Return to normal screen
Press MENU.
Fine-tuning channels
A
PR SET
Press MENU. Press w e to select the icon
"PR SET", then press OK.
● The Manual Channel Set screen of the
B
Press MENU.
C
Press rt to select the channel you want to tune, then press OK.
D
Press w e to select "MFT" setting, then
press rt until the picture is its clearest.
● Repeat steps 3 3 3 3 – 4 4 4 4 as necessary.
E
Press MENU twice.
— 9 —
Access Main Menu screen, then
Manual Channel Set screen
channel position currently received
appears.
Access Confirmation screen
Select position
Perform tuning
Return to normal screen
PR SET