Maintenance- And Repair Work; Repairing A Flat Tyre - Invacare Mirage Operating Manual

12

Maintenance- and repair work

The following are instructions on maintenance and repairs that can be performed by the user. For
the specifications of spare parts please see "Technical specifications" on page 117, or consult
the Service Manual, available from Invacare® (in this connection please see the addresses and
phone numbers in section "How can you get in touch with Invacare®?" on page 2). In case you
require assistance, please contact your Invacare® Dealer.
12.1

Repairing a flat tyre

WARNING: Danger of damage or injury if the vehicle is accidentally set into motion during
repairs!
• Switch the power off (ON/OFF Button)!
• Engage the motors!
• Secure the vehicle against rolling away by placing wedges under the wheels!
CAUTION: Risk of damage to the vehicle! Collisions can be caused if shim rings are
removed from the drive wheels during installation work!
• Shim rings are frequently placed between the drive shaft and the wheel hub to compensate
tolerances. Collisions can be caused if these shim rings are removed and not re-installed!
Please install all shim rings in exactly the same positions they were in before dismantling.
CAUTION: Risk of injury if maintenance and repair work is not carried out in exact
accordance with the instructions, including utilizing any special tools specified!
• If you do not have access to all the required tools, then you should NOT attempt to perform
the work!
91