Edit To Or From Another Video Recorder - JVC HR-J258E Instructions Manual

30
EN
Edit To Or
From Another
Video
Recorder
1
4
7
NUMBER "0"
1
MENU
2 3
2
5 6
8 9
0
4
TV PROG
?
OK
You can use your video recorder as the source player or the
recording deck.
MAKE CONNECTIONS
1
Connect the player's 21-pin SCART (AV) connector to
the recorder's 21-pin SCART (AV) connector as
illustrated on page 31.
When Using Your Video Recorder As The Source
Player . . .
. . . connect its AV1 IN/OUT connector to the recording
deck.
When Using Your Video Recorder As The Recording
Deck . . .
. . . . connect its AV2 IN/DECODER or AV1 IN/OUT
connector to the source player.
SET RECORDING DECK'S
INPUT MODE
2
Set to AUX. With this video recorder, press NUMBER
key "0" and/or TV PROG to select depending on the
connector being used — "L-1" for the AV1 IN/OUT
connector, or "L-2" for the AV2 IN/DECODER connector.
When using the AV2 IN/DECODER connector, make
sure "AV2 SELECT" is set to "AV2" (
START SOURCE PLAYER
3
Engage its Play mode.
START RECORDING DECK
4
Engage its Record mode.
NOTES:
All necessary cables can be obtained from your dealer.
When you use this recorder as the player for editing, be sure
to set "O.S.D." to "OFF" before starting (
EDITING (cont.)
pg. 31).
pg. 10).