E&M Card (Kx-T96184) - Panasonic KX-TD500 Installation Manual

2.5 Trunk Cards
2.5.7 E&M Card (KX-T96184)
E&M
PUSH
1.
Connection of the E&M Line cord (twisted cable)
Connector type
50 pin(Amphenol 57JE
50 pin (Amphenol 57JE
series or theequivalent)
series or the equivalent)
• Connect the ground wire to the ground wire connector (GND).
• Insert the 50-pin connector (plug) of the E&M Line cord (twisted cable) into the 50-pin
con-nector (jack) on the E&M card. See Section 2.1.4 Amphenol 57JE type
Connector.
2.
Connection of cable pins
See Section 2.5.17 Cable Pin Numbers for E&M Lines.
116
KX-T96184
Connector type
• Insert this card into a free slot.
To Terminal Board
from the E&M Line
Installation