Editing; Video; Recorder; Edit To Or From Another Video Recorder - JVC HR-DD857MS Instructions Manual

34
EN
Edit To Or
From Another

Video

Recorder

COLOUR SYSTEM
1
4
7
NUMBER "0"
1
TV Receiver
VIDEO
CHANNEL
RF Cable (provided)
2 3
2
5 6
8 9
0
4
TV PROG
Player Your recorder
AV Cable
(not provided)
Another recorder
Recorder
You can use your video recorder as the source player or the
recording deck.
MAKE CONNECTIONS
1
Connect the player's AUDIO/VIDEO OUT connector to
the recorder's AUDIO/VIDEO IN connector.
Use the L connector for monaural connection.
SET RECORDING DECK'S
INPUT MODE
2
Set to AUX. With this video recorder, press NUMBER
key "0" and/or TV PROG to select depending on the
connector being used — "L-1" for the rear panel
VIDEO/AUDIO input connectors, or "F-1" for the front
panel VIDEO/AUDIO input connectors.
START SOURCE PLAYER
3
Engage its Play mode.
START RECORDING DECK
4
Engage its Record mode.
NOTES:
All necessary cables can be obtained from your dealer.
NTSC tapes being played back in the NTSC [ PAL mode
( p. 41) cannot be dubbed to another recorder.
When you dub an NTSC tape using your recorder as the
playback deck, select NTSC 3.58 (or NTSC 4.43) with the
COLOUR SYSTEM button. (
If you use this recorder as the player for editing, be sure to
turn off 3R Picture before starting. (
IMPORTANT:
To edit, both the player and the recorder must be of the
same colour system. Press your recorder's COLOUR
SYSTEM button to select the appropriate colour system.
For more information on multi-system compatibility,
pg. 40.
Recorder Your recorder
AV Cable
(not provided)
Another recorder
Player

EDITING

p. 40)
pg. 13)
TV Receiver
VIDEO
CHANNEL
RF Cable
(provided)